Swaging Tool-3 Cavity
Swaging Tool-5 Cavity
Swaging Tool-1/8" Single Cavity
Swaging Tool-3/16" Single Cavity
Cup Hook Driver-Short
Cup Hook Driver-Long
Sta-Kon Crimping Tool
Economy Sta-Kon Crimping Tool
Conduit Indenter Tool
Replacement Points for Conduit IndenterTool
Cable Cutter-Felco C-7
Cable Cutter-Banana Handle
Cable Cutter-Felco #C-9
Fluid Film-11.75 oz. Aerosol
Best stuff ever made for rust and lubrication
Catching Hook With Wire Handle
Catching Hook with Plastic Handle
AMT Tough Tong 37"
Tension Spring For Tough Tong
Vfence-12" x 12'
Please note: This item incurs extra shipping charges due to length.
Coating - Epoxy coating is
electrostatically applied and then oven cured to provide continuous coverage on
all surfaces at 3-5 mils thickness.
Steel - Grade C 1008 cold drawn
PSY 100,000 tensile strength. Line wires are .160 in. (4.0 mm) and cross
wires are .091 in. (2.3 mm) at a gap distance of .53 in. (13.4 mm).
Installation - Starting at one side
of house, layout lengths overlapping 2”- 4” between sections to lock in. (More
than 4” acceptable to avoid cutting and does not reduce ventilation
properties). Water/ feed lines– use bolt cutters to cut out vertical
wires and top cross wire to drop in water lines.
Migration Fence Stand
Migration Fence - 16" x 12' (stand sold separately)
AMT Tough Tong-30"
Vfence-14" x 12'
Gate Insert for V-Fence - 12"
Gate Insert for V-Fence - 14"
Replacement Jaw for The Picker
Professional Cable Cutter
TURBOHANG for TurboGrow and Turbogrow 2 (Box of 100)
Turbo Shut Off (Box of 50)